Showing posts with label about. Show all posts
Showing posts with label about. Show all posts

Wednesday, March 23, 2016

Boat Plans At Mystic Seaport | More Messing About with ‘Pike’ – Part 2

Boat Plans At Mystic Seaport



Reefed


Reefing snotter


Rope horse


Brailing line and fairlead

Being able to reef the sail quickly and easily is important; therefore I replaced the experimental polypropylene luff lacing with a permanent Terylene one, and I devised a dedicated reefing snotter. I also exchanged the rope horse for a new one. To prevent the brailing line from being jigged up the mast and out of reach, I added a fairlead and a hook for the tail.

These changes have made it so much easier to reef the sail.

Link

More Messing About with ‘Pike’ – Part 1

http://bills-log.blogspot.co.uk/2015/09/more-messing-about-with-pike.html


Do you find information about Boat Plans At Mystic Seaport are you looking for? If not, below may help you find more information about the Boat Plans At Mystic Seaport. Thank you for visiting, have a great day.

Tuesday, March 22, 2016

Boat Plans Aluminium Australia | More Messing About with ‘Pike’

Boat Plans Aluminium Australia



Toggles


Cord


Sail lowered

Once again I find myself undoing what a previous owner did with ‘Pike’. Perhaps the biggest mistake he made was attaching the luff of the sail to the mast with toggle cords. They were all identical in length, but the mast was tapered; hence the upper part of the luff sagged away from the mast, especially when tension was placed on the sprit snotter. Another disadvantage of a toggle system became obvious when I tried to reef the sail. As it was lowered, some of the toggle cords had to be undone to enable them to pass over the snotter fairlead, then they had to be done up again.

The traditional single luff cord passing through cringles is far superior, because to lower the sail for reefing, one simply eases the snotter and the halyard. After the reef is tied, they are re-tensioned. Because the reef is rolled in the form of a sausage, the sheet becomes twisted. To untwist it you disengage the clew block that is attached to the clew cringle with a snap hook, then hook the block back on again. The sail is reefed, and you are ready to go!

Another advantage of the single luff cord is being able to lower the sail into the boat where it can be lashed securely around the sprit.




Do you find information about Boat Plans Aluminium Australia are you looking for? If not, below may help you find more information about the Boat Plans Aluminium Australia. Thank you for visiting, have a great day.

Sunday, March 20, 2016

Boat Plans For A Chesapeake Deadrise | Messing About with ‘Pike’ ‘Rat’ and ‘Mole’

Boat Plans For A Chesapeake Deadrise










“Believe me, my young friend, there is nothing - absolutely nothing - half so much worth doing as simply messing about in boats.”

“And don’t I know it Rat!” was my reply ……… And off we went!

That’s what it was like this afternoon when I set to the oars, or should I say ‘sculls’, in view of the renowned company I was in. The objective was to row towards Battlesbridge and to have an interesting time. Hopefully we would return to Hullbridge before sunset - better still, in time for tea. There was very little wind, and because it was relatively calm I had deliberately left the sailing rig at home. Rowing would be fun. Indeed, it was, and with Rat and Mole beside me, what could go wrong?

As I got into the swing of things I listened to Rat chatting to Mole, Nothing seems really to matter, thats the charm of it. Whether you get away, or whether you dont; whether you arrive at your destination or whether you reach somewhere else, or whether you never get anywhere at all, youre always busy, and you never do anything in particular; and when youve done it theres always something else to do, and you can do it if you like, but youd much better not.”

Before I knew it, three hours sped by, and there we were back at the slipway. I said goodbye to Rat and Mole, and thanked them for showing me the importance of NOT being earnestand of not being bothered if objectives are not achieved. In fact, why have objectives at all? – Far better to have happenings. Without trying, we merrily made it to Battlesbridge, only once drifting into reeds and surviving in the wake of a speeding motorboat and not colliding with a silent dinghy or being attacked by angry swans.

Tea was absolutely delicious.

As for Pike and me, we would do it again any day with Rat and Mole as our companions.

Links

Wind in the Willows by Kenneth Grahame
http://www.online-literature.com/grahame/windwillows/1/ 

The Importance of Being Earnest

https://books.google.co.uk/books/about/The_Importance_of_Being_Earnest.html?id=sWu2bfKcyb0C


Do you find information about Boat Plans For A Chesapeake Deadrise are you looking for? If not, below may help you find more information about the Boat Plans For A Chesapeake Deadrise. Thank you for visiting, have a great day.

Saturday, March 19, 2016

Boat Plans Australia | A rumor about dismasting

Boat Plans Australia


EVERY NOW AND THEN I hear the rumor that sailing under a jib only will cause dismasting. It’s one of those rumors that surfaces for a while, dies a natural death because of its inherent stupidity, and then miraculously is reborn, to start the cycle again.

I have no idea why sailing under a jib only should cause dismasting. I have sailed many hundreds of deepsea miles under jib only, and in stormy weather, too. I have wondered if maybe a fractional rig was more vulnerable than a masthead rig, because of the stress at the top of the mast caused by a lower forestay and a higher backstay, but I imagine that any naval architect would know how to compensate for that.

A Cal 20 of mine was fractionally rigged, and she would sail just fine under working jib only, and even go to weather in strong winds. So did my old Mirror dinghy, for that matter. I have vivid memories of planing under a jib little bigger than a pocket handkerchief after a sudden windstorm hit, and I dropped the mainsail completely. She, too, would go to windward under jib only, but carrying a whole lot of lee helm, of course. And despite the many miles I’ve done under jib only, I’ve never lost a mast. Touch wood.

There is, in fact, a long tradition of yachts tackling the trade winds with twin jibs and no mainsail. I mean, one of the lovely things about the lone jib, or twin jibs,  on a deepsea keeler is that the center of effort is so far forward that a windvane, which normally struggles dead downwind, is able to guide you to leeward with ease. You can huddle down below, nice and warm and dry, with your hands wrapped around a mug of coffee and rum, while your boat goes downwind like she’s on rails.

The only problem with this rig is that if your course is deeper than a reach, your boat will roll from gunwale to gunwale. But all dead-downwind work is pretty rolly, anyway, unless you know how to fly twin jibs or a twistle yard in a deep V forward, so they act like a cone and resist a lot of the sideways movement.

So don’t be put off. Fly that darn jib on its own if you like, and to heck with the rumor mongers.

Today’s Thought
Rumor travels faster but it don’t stay put as long as truth.
— Will Rogers, The Illiterate Digest                                                      

Tailpiece
Our local school officials recently gave eighth-graders a test to see what they were best suited for.
They discovered that the eighth-graders were best suited for the seventh grade.


Do you find information about Boat Plans Australia are you looking for? If not, below may help you find more information about the Boat Plans Australia. Thank you for visiting, have a great day.

Friday, March 18, 2016

Small Boat Plans And Kits | Messing About with ‘Pike’ – Part 4

Small Boat Plans And Kits






An owner of a sailing boat can have a considerable amount of fun tinkering with her, and the usual reasons for doing so are to improve her or make her more suitable for the owner’s use. He may want to improve her performance, her condition, or her interior, etc.. Sadly, some owners think they can improve their boat, whereas by straying from the original design, they unknowingly do the opposite.

‘Pike’ is such a boat. A previous owner added a boom and a tiller extension, both of which I have removed. The boom made reefing the sail difficult and the extension was totally unnecessary. Someone has also changed her rudder into a semi-lifting one. In my opinion none of these changes improved the original boat. With regard to the rudder, it has a number of strings for raising and lowering the bottom half of the blade. There are pieces of metal attached either side for aligning and locking parts together. These additions interfere with the flow of water, causing drag. The only advantage of this arrangement is being able to reduce the rudder’s draught for sailing in shallow water; at the same time the daggerboard has to be raised.

I’ve added an anchor, but it does not adversely affect the performance, or interfere with the functioning of the boat, and it is not fixed to the hull.

Recently I exchanged like for like: The stern buoyancy bag had a slow leak; therefore I replaced it with a new one.

As far as I can tell, ‘Pike’ is ready for her next sail; except the nearside wheel of her road trailer does not run freely. I shall have to investigate the cause and put the matter right.

Link

Crewsaver Buoyancy Bag

http://bills-log.blogspot.co.uk/2015/07/crewsaver-buoyancy-bag.html


Do you find information about Small Boat Plans And Kits are you looking for? If not, below may help you find more information about the Small Boat Plans And Kits. Thank you for visiting, have a great day.

Saturday, March 12, 2016

Wood Boat Plans And Kits | Messing About with Pike Part 5

Wood Boat Plans And Kits








By way of an experiment Im uploading this article from my mobile phone.

Today I checked the nearside wheel bearing of Pikes road trailer and I couldnt find any fault with it. As a precaution I re-packed the bearing with fresh grease.

I finally got around to sorting out the sheet by converting it into a continuous one that runs between blocks at each quarter. The sheet is long enough for the sail to be fully brailed to the mast, and it no longer interferes with the tiller as it did when it passed through a block attached to a rope horse.

Im hoping the new setup will be better than the previous arrangement.


Do you find information about Wood Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wood Boat Plans And Kits. Thank you for visiting, have a great day.

Boat Plans Bruce Roberts | Messing About with Pike

Boat Plans Bruce Roberts







As regular readers will know, Pike is my Iain Oughtred skiff. I bought her at the end of May, but I’ve only sailed her once. My intention was to try her to see if I could regain my confidence for sailing again. Prior to that, I had sold Minnow ***along with her gear, because I lost all desire for getting out on the water. Readers of this blog, friends and relatives tried to persuade me not to sell Minnow, but I would not listen, being convinced that my lifelong passion for sailing had finally come to an end. Others asked me to crew, but I did not accept their invitations. Then I was asked by the owner of Ladybird to come for a sail, and although I was hesitant I said I would give it a go. I was a bit anxious on the day, but the sail went well.*

The experience helped me gain confidence for taking Pike for a sail**. Since then I’ve had a two day cruise**** aboard Ladybirdwhich has given me more confidence. Therefore I’m looking forward to another sail with Pike, but that won’t be until the weather cheers up, and conditions are right. From loss of confidence to looking forward is a big step in the right direction. Meanwhile, I’ve been messing about with Pike on dry land doing maintenance and modifications.

Links

Pike Skiff designed by Iain Oughtred
http://bills-log.blogspot.co.uk/2015/06/pike-skiff-designed-by-iain-oughtred.html 

*Day Sail with ‘Ladybird’
http://bills-log.blogspot.co.uk/2015/06/day-sail-with-ladybird.html

**Had an Excellent Sail with ‘Pike’ – Part 1
http://bills-log.blogspot.co.uk/2015/07/had-excellent-sail-with-pike.html

**Had an Excellent Sail with ‘Pike’ – Part 2
http://bills-log.blogspot.co.uk/2015/08/had-excellent-sail-with-pike-part-2.html

***’Minnow’ Pledged to Another (Sold)
http://bills-log.blogspot.co.uk/2015/01/minnow-pledged-to-another-sold.html

****Two Day Cruise - Part 2
http://bills-log.blogspot.co.uk/2015/08/two-day-cruise-part-2-burnham-to.html 






Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.

Friday, March 11, 2016

Plywood Boat Plans Australia | History Seahorse John Rousmanieres article about Richard E Carter

Plywood Boat Plans Australia


Well ! It is a young and fun time when at 25 years of age you design World Class Racing and Cruising sailboats. Really, and for all of us in the Tower. Would be impossible to duplicate these days. Thank you for John and Seahorse for the publication of this article. And thank you Dick for believing we could translate your visions.










Do you find information about Plywood Boat Plans Australia are you looking for? If not, below may help you find more information about the Plywood Boat Plans Australia. Thank you for visiting, have a great day.

Boat Plans Wood | Antifoul on just about there

Boat Plans Wood


The levitating boat trick.



Do you find information about Boat Plans Wood are you looking for? If not, below may help you find more information about the Boat Plans Wood. Thank you for visiting, have a great day.

Sunday, March 6, 2016

Wooden Boat Plans Australia | New Season about to start

Wooden Boat Plans Australia


Blinks program for 2015

- Opening Day / Ambassadors Race (will we once again semi-submerge an ambassador?) 19 Sept
- Inshore Season Championship begins 3 October, most Saturdays after that
- Eye Registrars harbour cruise 18 October
- First offshore for the season (Brothers Islands Race) 31 October
- Waikawa - Wellington (Sav Blanc Race) 6 November
- Port Underwood - Ship Cove Race 14 November
- Cook Strait Classic 19 November

- 2-handed offshore training: TW + VW + coach, to be arranged ...

and big targets for 2016:
- 2-handed Central Triangle Offshore 19 Feb - 4 March
[- Likely to do Fiji (fully crewed offshore) June 2016 and then maybe Airlie Bay Race Week (Aus)]

Do you find information about Wooden Boat Plans Australia are you looking for? If not, below may help you find more information about the Wooden Boat Plans Australia. Thank you for visiting, have a great day.

Saturday, March 5, 2016

Boat Building Plans And Kits | Messing About with ‘Pike’ – Part 3

Boat Building Plans And Kits





The weather hasn’t been brilliant lately, and there’s hardly been a day when it hasn’t rained, but that hasn’t stopped me messing about with ‘Pike’.

In anticipation of eventually having a sun-filled day when the tide is right and I have time to spare, I’m preparing ‘Pike’ for a second sail. During the first sail I was conscious that I did not have a suitable anchor. The one I had was far too small. The Dinghy Cruising Association recommends equipping a cruising dinghy with an anchor weighing no less than 5 kilos, irrespective of type, along with at least 2 metres of chain between it and 30 metres of 8 millimetre, non-floating cable. (Safety Recommendations 3.3)* That is a good rule of thumb.

It’s all very well having such an anchor with its chain and cable, but all the bits and pieces must be secured in a way that the anchor can be deployed at a moment’s notice. If the dinghy were to capsize, the anchor must not become a hazard in the recovery process. Being able to deploy it at a moment’s notice could be crucial for keeping out of trouble. I recollect such an occasion when the tide was taking my Torbay Class 11 Racer towards the swing bridge at Teignmouth and there wasn’t enough room for the mast to pass under without hitting it. The anchor proved its worth, and all was well.

Another factor regarding anchor stowage is to make sure it does not damage the boat. Anchors are awkward things, because they have pointed bits and protuberances that are capable of inflicting injury; therefore it is best to stow them where they present the least hazard.

Bearing in mind these requirements I have made provision for ‘Pike’s’ anchor and tackle to be kept in a sturdy plastic bowl. The whole lot is retained by a rope that passes through fittings screwed to the hull. To deploy the anchor, all I have to do is undo the rope from a cleat and lower the anchor over the bow.

I feel happier about sailing ‘Pike’, now that she is equipped with a 5 kilogram Bruce anchor, with 2 metres of 8mm chain and 30 metres of 10mm nylon rope.

*DCA Safety Recommendations: http://dinghycruising.org.uk/pages/safety

Links

Messing About with ‘Pike’ – Part 2
http://bills-log.blogspot.co.uk/2015/08/messing-about-with-pike-part-2.html

Messing About with ‘Pike’ – Part 1

http://bills-log.blogspot.co.uk/2015/08/messing-about-with-pike.html


Do you find information about Boat Building Plans And Kits are you looking for? If not, below may help you find more information about the Boat Building Plans And Kits. Thank you for visiting, have a great day.

Wednesday, March 2, 2016

Boat Plans African Queen | The truth about sail twist

Boat Plans African Queen


WHEN WIND BLOWS over water there is, of course, friction generated at water level. Some of the energy generated by this friction is turned into wave energy. But what’s more interesting is the fact that the speed of the wind increases with its  height above water level.  Whereas friction slows down the wind at water level, there is nothing to prevent it reaching its full potential speed higher up.

That’s why, when a boat is sailing on a beat, the direction of the apparent wind changes by between 5 and 8 degrees from the bottom of the mast to the top. The actual amount of change will naturally vary according to the height of the mast.

Therefore, the rule of thumb is that the mainsail leech at the head of the sail should lie farther off the wind than the leech near the clew.

The reason for this is that if the true wind speed is higher up aloft, the apparent wind direction up there will be less affected by the boat’s forward speed. It will be nearer the true wind direction. Therefore, the top of the sail does not need to be sheeted as close to the wind as does the bottom.

I notice that your eyes have glazed over. No matter, if you find this fascinating fact very boring,  you don’t have to worry. You don’t have to take any action. Your sailmaker knows all about it, and has built the right amount of twist and camber into the sail for your boat.

There are times when you might be able to increase the efficiency of your mainsail by bowsing down the boom and hauling the leech very tight to remove the twist, but mostly only racers bother about that kind of thing, and they already know the difference between true wind direction and apparent wind direction and VMG and lee-bowing the tide and the meaning of telltales and all that other stuff, so you don’t have to bother your poor little brain with it. Besides, it’s comforting to remember that even if they are highly intelligent and do know it all, only one of them can win the race.  

Today’s Thought
Our knowledge is a little island in a great ocean of nonknowledge.
— Isaac Bashevis Singer. NY Times, 3 Dec 78

Tailpiece
When the admiral retired, he hired his personal orderly of over twenty-five years to come with him. The admiral explained that the orderly’s duties would be exactly the same as they were in the navy. On the first morning of the admirals retirement the orderly entered the admirals bedroom and woke him. Then he slapped the admirals sleeping wife on the backside. "Okay, honey, “ he said, “its time you got back onshore!"

(Drop by every Monday, Wednesday, Friday for a new Mainly about Boats column.)


Do you find information about Boat Plans African Queen are you looking for? If not, below may help you find more information about the Boat Plans African Queen. Thank you for visiting, have a great day.

Tuesday, March 1, 2016

Boat Plans Building | What to do about fog

Boat Plans Building


WHEN THE CLOUD COMES DOWN to water level we call it fog. Fog is very scary stuff and it can happen at any time of the year in our coastal areas. In fact, on the West Coast of the United States, fog occurs frequently from the Strait of Juan de Fuca, north of Seattle, to Santa Barbara, down south in California.

On the East Coast they experience fog from the Canadian Maritimes right down to Long Island Sound, New York. On average, these coastal areas experience areas of fog about 10 percent of the year, and some particular areas are blanketed in fog for twice as long. 

As I said, fog is scary. What can you do about it?

Actually, there isn’t much advice to give about getting caught in fog that isn’t covered by common sense. If you see a fog bank forming ahead, and you have a chance to turn back to a safe anchorage, do so. It’s the seamanlike action to take. Unfortunately, you don’t always have that choice.  You can run into a thick bank of fog at night without even seeing it. Been there, done that, didn’t like it.

Fog is treacherous. Go slowly and listen very carefully. Your ears are your eyes in fog. If fog catches you out, try to get into shallow water and anchor there. Once again, oftentimes that’s easier said than done.

If you have radar, use it, and practice often. Use AIS if you have it, also, but don’t expect everybody else to have it, especially that 40-foot ferro-concrete ketch with the long metal bowsprit that’s bowling along under power toward you.

You should raise a radar reflector as high as you can, so that other vessels with radar sets will see you. And you should be meticulous about making the right sound signal every two minutes or less. I have noticed that too many skippers are very lax about this. I have even traveled on a Washington State ferry that made no sound signals in thick fog, presumably relying on radar and clearance from Seattle Traffic Control, which can’t possibly tell the ferry if a small craft, invisible to radar, is in its path.

If you’re sailing, the correct signal is one long blast and two short blasts. That’s also the signal made by a vessel not under command, or restricted by her ability to maneuver. The same signal comes from a vessel engaged in fishing, or towing or pushing another vessel.

If you’re under power, the fog signal (and the signal in any kind of restricted visibility, by the way, including rain or snow in daylight) is one long blast every two minutes or less.

And one last tip – take along a horn that you can blow into. The fog horns that work off cans of compressed air don’t always work. I can vouch for that. I can also tell you that blowing the damn horn as loud as you can every two minutes is a pain in the you-know-what. You can’t go anywhere or do anything that lasts more than one minute, fifty-nine seconds. It puffs your cheeks out and raises your blood pressure. It makes you dizzy and produces black spots before your eyes. But it’s better than being run down at sea. So do it.

Today’s Thought
He that bringeth himself into needless dangers dieth the devil’s martyr.
— Thomas Fuller, Holy War

Tailpiece
“I’ve found out why production has slowed down since we got that second computer.”
“Good. What’s wrong?”
“The big computer’s shoving all the work on to the little computer.”

(Drop by every Monday, Wednesday, Friday for a new Mainly about Boats column.)


Do you find information about Boat Plans Building are you looking for? If not, below may help you find more information about the Boat Plans Building. Thank you for visiting, have a great day.

Saturday, February 27, 2016

Boat Plans Bolger | No more lies about size of waves

Boat Plans Bolger


THE COMING OF SPRING in the northern hemisphere ushers in a sense of renewal, a sense of refreshment and commitment to improvement. Spring always makes me want to be a better person than I was, which, admittedly is not difficult. This new sailing season I shall, once again, attempt to follow the Ten Commandments for Sailboat Owners:

1. Thou shalt not lie about the size of the waves, nor yet of the speed of the wind which hath assailed thee.

2. Thou shalt not covet thy neighbor’s gorgeous Hinckley nor his adorable wife.

3. Thou shalt not curse the weather forecaster unless severely provoked.

4. Thou shalt not pour scorn upon the Coast Guard boarding party, yea even though thine potty be legal.

5. Thou shalt slow down both in the marina and the anchorage; neither shall thine junior offspring run amok in the outboard dinghy.

6. Thou shalt not stamp thine foot, nor beat thine breast, nor rent the air with thine fists when thou receivest thy bill for engine repairs, for it frighteneth the children

7. Thou shalt not laugh openly at thine seasick mother-in-law.

8. Thou shalt not neglect to switch on the cooling water before starting the engine and blame it upon thine spouse.

9. Thou shalt not lie about when last thou changed the engine oil.

10. Thou shalt honor thine foredeck crew, and refrain from assailing them with raiséd voice, for they are the salt of the earth.

And one more for the helluvit:

11. Thou shall not allow thine halyards to smite thine mast, lest it arouse sleeplessness and bitterness among thy neighbors.

Today’s Thought
We must do the thing we must
Before the thing we may;
We are unfit for any trust
Till we can and do obey.
— George Macdonald, Willie’s Question

Tailpiece
“What happened to your ear?”
“Well, I was ironing my shirt when the phone rang and I accidentally put the iron to my ear.”
“Bummer. And what happened to the other ear?”
“Well, I had to call 911, didn’t I?”

(Drop by every Monday, Wednesday, Friday for a new Mainly about Boats column.)


Do you find information about Boat Plans Bolger are you looking for? If not, below may help you find more information about the Boat Plans Bolger. Thank you for visiting, have a great day.

Sunday, February 21, 2016

Boden Boat Plans Australia | Messing About with ‘Pike’ – Part 2

Boden Boat Plans Australia




On and off, I am still messing about with Pike, and as Rich_D said in his comment to Part 1, such activity ashore and afloat can bring ‘simple pleasures’. This is true.

Yesterday I spent time making a copper fastening for retaining a section of rope fender that had come loose on the port side of the boat. One of the old fittings had snapped, and it required replacing.



I’m not keen on rope fenders. Pike’s look untidy, but they do the job of protecting her topsides.  Just above where I did the repair - on the gunnel - the paint has been damaged by a pad made from adhesive carpet tape for preventing the trailer strop from biting into the gunnel. I’ve found a way of avoiding further damage by dispensing with the pad and placing the strop in the rowlocks.





When I took Pikefor a sail, and I came to row her, I noticed that pieces of plastic piping clipped to the sleeves to act as wear plates, rotated. To prevent this happening, I’ve fixed them to the sleeves with brass screws.


Another thing that bothered me was the untidy ends of Polypropylene ropes used for securing Pike’s cover; therefore I cut and sealed their ends by exposing them to flames from a gas ring on the hob of a cooker in the kitchen. 

My wife was very restrained when I suggested I should use ‘her’ kitchen for such a smelly job. With windows open and the door wide open, I carefully went about the job so as to leave no trace behind of what had taken place. I recalled times when I had laminated spars and various parts of boats in the kitchen, the lounge and the hall, even the bedroom – always when my wife was absent. She would return, never knowing what had taken place.

Links

Messing About with ‘Pike’ – Part 1
http://bills-log.blogspot.co.uk/2015/08/messing-about-with-pike.html

Polypropylene Ropes

http://www.polypropyleneropes.co.uk/ 


Do you find information about Boden Boat Plans Australia are you looking for? If not, below may help you find more information about the Boden Boat Plans Australia. Thank you for visiting, have a great day.
 

Download Boat Plans Copyright © 2016 -- Powered by Blogger